I used the stock stabs with my Zoom65v2 and no matter how I lubed them they always had a slight tick. So when I pre=ordered the Zoom75 I decided to go with TX stabs. The TX stabs are fantastic. I only lubed slightly with 205G0 (no dielectric grease) and they are absoutely silent and smooth. Clips (rather than screw-ins) work really well and are easy to install. Also avoids the short-circuit issue with the enter key on the Zoom75.
Easy to tune and requires zero effort.
Would highly recommend - the tx stabs worked great on my 1.2mm board and were shipped promptly. Will be a repeat customer.
First things first, I am a noob so take this review with a pinch of salt. These stabs are worth all the hype once assembled. As the name suggests, almost perfect (still a slight tick on my spacebar but that might just be a bent wire).
However, I found it extremely difficult and frustrating to get the wire to pop into the housing. Maybe the tolerances are too small.
For the price point you are getting premium stabs with little to no wire balancing needed. Using 205 krytox and XHT-BDZ on the wires has been an excellent experience. Will definitely buy again 10/10