Product Features
- Web-based firmware (https://venom.how/)
- RISC-V32 architecture applied
- Supports 8KHz polling rate / 14KHz scan rate per key
- 0.16ms latency
- Custom PCB standard specifications
Product Malfunction Check Points
- Use USB 2.0 high-speed or higher A TO C cable
- USB hub not recommended
- Use Chrome browser
- Initialize USB driver
- Firmware upgrade or factory reset
Compatible Switches
- RAPTOR HE
- RAW HE
- Lucifer HE
- GATERON KS-20 / KS-20T, etc.
- N-pole switch, 1600gs or less at bottom magnetic force
Compatible Stabilizers
- PCB mounted
Custom Keyboard Assembly Requirements
- VENOM HE PCB
- HE compatible reinforcement plate
- HE compatible switches
- Compatible housing
- PCB mounted Stabilizer
PCBs
Venom HE 60% RGB PCB
Type : Hall effect
Material : FR4
Thickness : 1.6mm
Examples of LED Effects Photos
Note for purchase.
Due to the waterproofing process, the coating material may be visible on the left and right sides of the USB-C port, but this is a normal product condition.
Keep in mind
PCB does not include a JST cable and screws.
Plates include screws compatible with Venom PCBs.
All products are made in the size of GH60, which is the standard in the custom keyboard sector.
Before you start assembling the PCB, please carry out a PCB test and check if all keys function.
Before assembling the screws, remove the yellow tape on the stand-offs of PCBs.
Whether or not to use foam sets is optional.
To assemble the PCB and the plate, you must use all 8 screws.
After removing the C-type port once, you cannot put it on again.
For JST cables, you need to use a cable with the same pin layout on both ends.
Manufacturing country
Made in China