Group-buy Period: 19th September to 20th October
Estimated Shipping: Q3 2026

SPECIFICATIONS

ALTAIR

7° typing angle
~1200g total weight
Approx 144 x 127 x 30mm
1.2mm hotswap PCB
QMK/VIA support
Aluminium chassis
Brass weight only
PCB gasket mount
Black, Camo Green, Navy, and Silver

ALTAIR-X

7° typing angle
~900g total weight
Approx 144 x 108 x 28mm
1.2mm hotswap PCB
QMK/VIA support
Aluminium chassis
Brass weight only
PCB gasket mount
Black, Camo Green, Navy, and Silver

IN THE BOX:

Each Altair and Altair-X will come with the following

Left and right aluminium keyboard case
Brass weight in each side
Left and right hotswap QMK/VIA PCB and DB
Ribbon cables
Left and right PC plate
3' White rubberized USB-C to USB-C cable
Custom carrying case
Silicone feet
Poron gaskets
Screws and hardware for assembly

ALTAIR R2 by AI03

After half a decade of development and over two years of use as a daily driver, Altair and Altair-X represent ai03’s current benchmark in keyboard design for productivity and comfort. Going beyond just internals or mounting methods, the Altair family blends a fully-split ergonomic key layout with high-end keyboard visuals and internals to take typing comfort to the next level.

THREE PILLARS

When designing the Altair family of keyboards, ai03 used three pillars to act as design beacons. These three pillars can be seen throughout the keyboard design and philosophy.

Ease of Learning

While visually unique, Altair closely matches a typical keyboard in general key positions.

Care has been taken to make sure that anyone can learn the layout quickly, while also being able to jump between Altair and other keyboard layouts when necessary.

image12-43.png__PID:9f4bdc82-ae79-4375-9232-c0052d6f8ae0

Typing Excellence

Altair’s key placement matches natural finger movement ranges closely, minimizing both finger and hand-movement during use.

This in return minimizes typing effort and strain, while also contributing to higher possible typing accuracy and speeds.

image25-43.png__PID:4bdc82ae-7913-4512-b2c0-052d6f8ae0ca

The Ergo Advantage

Altair’s layer switching keys are conveniently placed right next to the spacebars, allowing for convenient layer switching with minimal finger movement.

Taking full advantage of Altair’s split design, an extra column has been added to the inner side. This allows the use of more macros, dedicated brackets for programming efficiency, or even a duplicate set of alphas.

image1-43.png__PID:d59f4bdc-82ae-4913-b512-32c0052d6f8a

FORM MATCHES FUNCTION

Carefully drawn curves wrap around the keys, integrating the ergonomic key layout into part of the visuals. A unique mix of soft organic curves and bold straight edges create a dynamic aesthetic, allowing Altair to stand out visually.

DSCF0203.jpg__PID:6a24804b-0413-4d0b-a7dc-5607e19473d8

A bottom emblem weight adds the final visual touch, while also serving as an acoustic damper and a crucial mass to anchor the compact board to the desk.

SCULPTING AND ENGINEERING IN TANDEM

AltairX_Exploded-thin.jpg__PID:6dd3e626-0bc3-454d-86de-0cf16614c836

Altair features a unique PCB gasket mounting system. Small gasket columns hold the PCB from below around the rim, allowing for even vibration and impact absorption with no rigid spots close to mounting points.

DSCF9988-colored-v2.jpg__PID:93c9808d-d89f-4ff3-8362-6627892b1f48

Special screws act as columns that keep the internals secured and aligned within the single-part case, making the gasket mount possible without the need for multiple case parts.

DSCF9954.JPG__PID:671f2d08-cde0-456a-ade2-cc32925b89c7

THE POWER OF TWO

Each half of an Altair has its own MCU and USB-C ports, making it effectively two keyboards. Each half can be placed close together, far apart, and anywhere in between. Simply connect them with a USB-C cable and you're good to go. You can even use just one half as a stand alone keyboard/macropad.

NO COMPROMISE SOLUTIONS

Altair take custom to the next level. Custom case. Custom PCBs. Custom Daughterboards. Each piece working together in perfect coordination to make the unique layout possible without compromising form or function.

The PCB edge bends to perfectly match the case, and the daughterboard precisely angles its USB connectors to match the rear curvature while minimizing interior cutouts.

image31.jpg__PID:da2ed391-a609-45a3-96d9-cd5da83a4d13

Altair cuts no corners with high-end tuning and optimization. Its 7° incline and a front ledge that drops down as low as 16.7mm at its tip allows the keyboard to remain comfortable to use even without the assistance of a wristrest.

언어

통화

가입하고 저장하세요