Fourwraps V2 Stabilisers are lube optional stabilisers and made in Korea by Morning Workshop. The stabiliser's internal wire guide in the stem help to reduce wire ticking. If you choose to apply lube to the Fourwraps stabilisers, we recommend very light lubing on the wire.
SSS - Fourwraps V2 Stabiliaers Features:
- Designed by Morning Workshop
- PCB Mount
- Lube Optional
- Lubing is recommended for fine tuning (spacebar is recommended) but using the stabilizer stock is acceptable.
- Bi-directional Stem
- Stem Internal Wire Guide: Reduces wire ticking and minimizes wire balancing requirements
- Supports Clip-in & Screw-in
- Screw-in requires removal (clipping) of the clip-in feet (front and back)
- There are two sized washers provided. It is recommended to use the bigger washer combined with a small washer for the bigger opening and a single small washer for the clip-in (smaller) opening
- Screw-in on the front and back mounting points help to minimize wire balancing requirements
- Screw-in requires removal (clipping) of the clip-in feet (front and back)
- Made in Korea
Includes:
- 10 Housings
- 10 stems
- 4 2U Wires
- 1 6.25U Wire
- 1 7U Wire
- Set of Screws & Washers